Microbrewery Tube Fittings

Food and beverage production facilities require tubing and fittings that exceed rigorous sanitary, quality, and corrosion resistant standards, as maintaining hygienic conditions is of the utmost importance for consumers.

Stainless steel tubing and fittings are the ideal choice for food and beverage applications, as its inert properties provide resistance to chemical reactions that could compromise health standards. Not only does stainless steel tolerate a wide range of temperatures, it also assists in controlling hygienic hazards with smooth surfaces that reduce biofilm accumulation while being easy to maintain and clean.

SANITARY TUBING & FITTINGS

TEK Mahony is a trusted industry leader, providing the highest quality stainless steel fittings and tubing for the food and beverage industries. We are proud to offer VNE clamp and weld fittings and ASME-BPE compliant stainless steel tubing from RathGibson – a perfect combination for sanitary applications used in the food processing, breweries, distilleries and dairy production facilities.

VNE RathGibson

VNE WELD FITTINGS

VNE Weld Fittings

VNE Weld Fittings are ideal for permanent installations where process piping and equipment can be cleaned in place (CIP) and removal from the system is not required. Weld Fittings are offered in nominal tube sizes 1/2˝ through 8˝ in T304 and T316L materials. Uniform wall thickness for 1/2˝ through 3˝ sizes measure .065 (16 ga). In 4˝ size, wall thickness measures .083 (14 ga), 6˝ and 8˝ .109 (12 ga).

Specifications:

  • Size Range: 1/2˝ OD through 8˝ OD
  • Materials: T304, T316L
  • Finish: No. 7 – ID & OD
  • No. 5 – OD only
  • No. 3 – ID only
  • No. 1 – unpolished

VNE CLAMP FITTINGS

VNE Clamp Fittings

Clamp Style Fittings are the perfect choice for easy assembly and breakdown of process lines and equipment, offered in T304 and T316L materials in 1/2˝ through 12˝ sizes.

Specifications:

  • Size Range: 1/2˝ OD through 12˝ OD
  • Materials: T304, T316L
  • Finish: No. 7 – ID & OD
  • No. 5 – OD only
  • No. 3 – ID only
  • No. 1 – unpolished

RATHGIBSON TUBING

RathGibson Tubing

We offer 3-A and ASME-BPE compliant stainless steel tubing in 304/L and 316/L in 1/32”-6” OD. Available as bright annealed mill finished straight lengths and coil lengths or mechanically polished to 20 μ-in Ra (0.5 μm) maximum ID and 30 μ-in Ra (0.8 μm) maximum OD surface roughness, exceeding ASTM A270-S2 and 3-A specification requirements.

QUESTIONS?

Allow our experts to answer any questions you may have or provide a quote for the sanitary tubing and fittings you require.